Bryan Kolstad – Types of Recreational Boats

Bryan Kolstad is a marine mechanic based in Maine. He fixes both recreational and commercial boats for clients in his town and the surrounding area. Maine is an amazing place to go boating, because there are so many beautiful places there that you can only access by boat. Many people who live or vacation there choose to invest in a boat for all of the fun recreational and social benefits. There are a few different types of recreational boats to choose from, depending on your needs.

-Cruisers: These boats are intended mainly just for relaxing and having fun out on the water. They come in many different sizes, ranging from smaller models that fit just a few people to larger yachts. However, these boats tend to be larger than other recreational boats, so you can fit more people on them to socialize.

-Sport boats: These boats are created to be very streamlined. They can accommodate water skiers, and they can reach very high speeds for racing as well. These boats tend to be quite expensive because they are very high-quality. There are several different subcategories of sporting boats for different activities.

-Fishing: These are boats that are designed specially to accommodate fish. They are great for the sailor who loves to fish and needs the extra space for equipment. There are several different types of fishing boats on the market that are created for different types of fishing, such as freshwater fishing or bass fishing.

Bryan Kolstad loves fixing recreational boats for his clients.

Bryan Kolstad – Choosing the Perfect Moped for You

Bryan Kolstad is a marine mechanic who has many hobbies and interests outside of work. One of his favorite things to do is ride mopeds. Since he lives in Maine, mopeds can be a fun way to get between towns and see some of the beautiful countryside during the summer. Mopeds are a great investment for anyone needing an easy and simple mode of transportation that’s less expensive than a car. Here is what you should consider when choosing a moped to buy.

The first thing to consider is your budget, and whether you want a new or used scooter. Mopeds are great because they have lower gas and maintenance costs than a car, but they can still be expensive. It’s also important to remember that not all used mopeds are created equal – some are much better quality than others. Set a budget before you go to the dealership, and keep in mind that the gas and repairs on the scooter will cost you money in the long term as well.

Then, you will need to choose what size of moped you would like. They come in different engine sizes, ranging from 50cc to upwards of 250cc. The higher the engine number, the more powerful the scooter (and the more expensive it will be). Your goal should be to find a balance between performance and price. It’s important when visiting moped dealerships to take your time and evaluate what you really want out of your scooter. By making sure you get the best moped for you, you’ll be sure to have lots of fun adventures on it, like Bryan Kolstad does.

Bryan Kolstad – Interesting Things You Didn’t Know About Archery

Bryan Kolstad took to archery as a teenager. After his first time handling a bow, he immediately knew this was one sport he wanted to pursue and invested his time and energy in developing his talent. Archery has developed over the years and has become a popular sport in the United States and around the world. Bryan Kolstad shares a few interesting things you didn’t know about archery.

One of the Safest Sports

Archery is one of the safest sports, according to the National Safety Council. The sport is safer than golf and according to statistics, there has been only one injury for every 2,000 participants. In fact, archery is even safer than bowling.

Speed of Arrows

The speed of an arrow released in competitions flies at over 200 mph. That is about three times faster than a cheetah which is only about 68 mph. With the new line up of compound bows using high quality material, archers have been able to reach speeds up to 347 feet per second. Converted into miles per hour that amounts to 263 mph.

Archery Disappeared from the Olympics

Archery was introduced to the Olympics in 1900 but was dropped in 1920 because there was no uniformity in rules and equipment. It was only reintroduced to the Olympics in 1972, and has continued to be a major sport ever since.

Bryan Kolstad is a toxophilite – an archer. Toxophilite is from the Greek word “toxon” meaning bow and arrow, and “philos” meaning loving.



Bryan Kolstad – Golf Tips for Beginners

Bryan Kolstad is a member of the Maine State Golf Association and has played at several of the golf courses in the area. He has been playing golf for several years and enjoys playing with his friends when he is not busy working on a boat engine. Bryan Kolstad shares a couple of tips beginner golfers can use.


Many people who have never played golf before have a tendency to hold the club just as they would a baseball bat. However, that is not the right way to grip a golf club. Getting the basics right will help you become a good golfer. To grasp the golf club properly, you will need to take it in the palm of your lead hand, the one that is closest to the hole, and slide your back hand just below your lead hand. Interlock the pinkie finger of your back hand with the pointer finger of your lead hand. The thumb on your lead hand should run along the top of the grip pointing downwards, and the thumb of your back hand should run downward as well, just below the lead hand thumb.

Posture and Approach

Your posture is very important, and you will need to ensure you are comfortable. The basics of a proper posture is your knees should be slightly bent, with your upper body leaning over the ball, your feet should be at shoulder width, and your arms out in front of you. Bryan Kolstad recommends taking the time to get used to finding the right posture before you start playing golf.



Bryan Kolstad – Things to do in Maine

Bryan Kolstad is happy he lives in Maine, otherwise popularly known as “Vacationland”. Whether you are interested in boating, biking, golfing, skiing, or visiting museums, Maine has it all. A trip to Maine and not going spending time at its beautiful coast is a vacation that is incomplete. Bryan Kolstad grew up in Maine and shares a couple of things you might want to do when visiting Maine.

Wolfe’s Neck Farm

Wolfe’s Neck farm is one of the popular attractions in Maine. Located on Burnett Road, Freeport it is one of the best places to enjoy a picnic. The farm is situated on 626 acres of land and offers four miles of oceanfront for its guests. If you are looking for a place where you can enjoy a true marine experience, this is the place for you and your family. Popular attractions at the farm include barnyard animals, nature trails, oceanfront camping (in summer), and a host of other fun things for the whole family.

Acadia Air Tours

What better way is there to enjoy the beauty of Maine than from the air. The Acadia Air Tours offers guests the chance to enjoy biplane and glider rides over Mount Desert Island and Acadia National Park. If you are someone who likes something different, then the Acadia Air Tours would be a great way to enjoy your visit to Maine. Take a ride in a historic biplane over the popular Acadia National Park, Bar Harbor and lighthouses before coming back to base.

Bryan Kolstad recommends enjoying the sights and sounds of Maine at your own pace.

Bryan Kolstad – How to Flush Your Outboard Motor

Bryan Kolstad has been a marine mechanic for over twenty years. He has built a successful career for himself in Portland, Maine and has been providing reliable and efficient marine repair and service to boat owners. Bryan Kolstad has worked on virtually all types of boat engines and shares a few tips on how to flush your outboard motor.

Flush the Engine

Whether you go on a salt water or fresh water boat outing, you will need to flush your outboard engine when you get back. If you have an older motor, you will need to get a set of flushing earmuffs, which are two flexible rubber seals that are attached to a metal clamp. Attach one side to a garden hose and the other one can be used to plug the water intake. Attach the garden hose to the earmuffs and turn the water on. If your outboard motor is a new model, you will have mounts, and will not need to use the earmuffs. Start the engine and let the water flush the system. You will need to stay clear of the prop and make sure the motor is not in gear.

Water Flow

When you open the tap and start flushing the motor, check the pump to ensure it has good water flow. When you put your finger through the stream of water coming out of the motor, it should be warm and not hot. If the output is not strong, check the outflow tube for any debris that may be preventing the flow of water. If there is debris, shut off the engine and use a small piece of wire to remove the debris from the tube and restart the engine again to flush it properly. Bryan Kolstad has been helping boat owners keep their engines in good condition for several years.



Bryan Kolstad – Four Easy Clay Sculpting Projects

Bryan Kolstad has been experimenting with clay sculpting and pottery for many years now, and enjoys this creative outlet for many reasons. Although it is easy to learn and practice, there are always more techniques to try, which keeps Bryan Kolstad engaged in this fun hobby. If you are interested in starting to sculpt, there are several easy projects you can learn from books or video tutorials.

1. Pinch pots: These small pots and bowls are traditionally one of the first things that many people learn to sculpt. These pots are made by ‘pinching’ the clay into the desired shape, and take only a few steps to create. You can also embellish them by adding more detail to the pot, or adding a texture to the clay with a stamp.

2. Candle votives: These are an easy beginner project, because all it requires is making a base and four sides, and then attaching them together. Use cookie cutters or another tool to add unique cutouts to the sides.

3. Coil pots/bowls: This is another technique for creating pots and bowls that involves coiling the clay into a long rope and then shaping it accordingly. This technique can also be used to make cups.

4. Decorative flowers/leaves: There are many online tutorials for making flowers, particularly roses, just by shaping slabs of clay into leaves or petals, and then attaching them together. After you’ve mastered a bowl, this is a good next step.

These are just a few of the fun projects that you can try when starting clay sculpting. Bryan Kolstad’s home is decorated by several items he created himself.


Bryan Kolstad – Jack Of All Trades

Bryan Kolstad is a Maine-based marine mechanic with a very wide variety of hobbies. During the day, he works on boats, fixing problems, restoring old vessels, and keeping newer ones properly maintained. But in his spare time, he enjoys partaking in many different activities. One of his most favorite hobbies is playing the tuba. Bryan Kolstad has always had a passion for music, and even prefers to work with it playing in the background. He took up the tuba when he was in middle school, and found that he had a natural talent for it. Bryan Kolstad continues to play to challenge himself physically and mentally, and also to tackle new and exciting pieces of music that he enjoys.

Bryan Kolstad also enjoys spending time outside. He loves to play golf on the weekends, and has visited many of New England’s best golf courses. He enjoys golf not only as a sport, but also as a social activity, and loves playing games to spend time with his close friends. Bryan Kolstad also owns a moped, and enjoys spending time outside riding it through the streets of Portland, which are ideally sized for a small vehicle like a moped. He also visits an archery range on most weekends, where he has been practicing his shooting. Bryan Kolstad recently invested in his own bow and arrow, and is excited to continue practicing this unique sport.

Finally, Bryan Kolstad is very creative, and has a passion for clay sculpting and molding. He took a pottery class several years ago, and since then has created several pieces for his home. He is currently expanding into more abstract sculptures, and loves spending time at a local art studio.

Bryan Kolstad – How to Start Archery

Bryan Kolstad has many hobbies and interests outside of his work as a marine mechanic, and one of his favorites is archery. He first took an archery class as a young teenager, and was immediately engrossed by this challenging and exciting activity. Archers use bows to shoot arrows at targets, aiming for the center of the target. It is a popular sport around the world, and archery ranges can be found in most major cities in the United States.

If you or someone you know is interested in archery, it is easy to get started. First, find a well-rated archery club located near you. These clubs will likely offer lessons for beginners. It may help to go to the club and meet the instructors before taking your first lesson, or to observe an archery practice before participating. Once you have decided that you would definitely like to try the sport, you will need a bow and arrow. Most archery ranges will have shops where you can rent or buy the equipment that you need. They will be able to help you determine which type of bow and arrow is right for you, as well as what size you need.

There are a few different types of archery that you can participate in. Most people think of target archery when they think of the sport –shooting arrows at a bullseye target. You can also participate in field archery, which takes place on an outdoor course, usually in the woods. Bryan Kolstad has participated in both types of archery throughout his lifetime, and enjoys them both.


Bryan Kolstad – Life as a Marine Mechanic

Bryan Kolstad is a professional marine mechanic based in Maine. As a marine mechanic, Bryan Kolstad works to repair and maintain the engine and other mechanical equipment on boats. Maine is a great location for this job because of its proximity to the Atlantic Ocean. Boating is a very popular recreational activity there, and boats are also used for shipping and many other commercial activities as well.

Bryan Kolstad became interested in boats at a young age. His family owned a boat, and he enjoyed fishing and sailing with his father during the summer in Maine. He was also interested in engineering and machines, and began studying the inner mechanics of boats. At the age of eighteen, he bought his first used boat, which he overhauled himself. His friends and family, realizing his talent for fixing boat problems, started recommending his services to family and friends, and he expanded his business from there.

Most marine mechanics do not receive a formal college education, and instead learn from other professionals or are self-taught. They typically enter the field soon after high school. There are many places where marine mechanics can work – they can work directly with the boats on the water, or they can work on land in any area where boats are kept, near oceans, lakes, or rivers. Although the job can be physically strenuous at times, it provides an interesting variety of work, and most marine mechanics experience consistent (but not overwhelming) amounts of business. It is for these reasons that Bryan Kolstad loves his work as a marine mechanic.